Recently, we've developed the prototyping board for musical instruments
and controllers.
This is our PICrouter. We intend to bridge OpenSound Control and USB by it.
The specifications are as follows.
1. Supported Open Sound Control.
2. Supported USB device(MIDI and HID composite) and host function.
3. Supported USB HID bootloader on Mac OS X and Windows
4. PIC32MX675F512H(Freq:80MHz/FLASH:512K/RAM:64K)
5. A/D ports x14
6. PWM output x4
7. SPI x2, I2C x3, UART x1, JTAG x1
8. in/out Digital ports x4
9. 100mm x 33.5mm, 4-layers board
Also, we're going to release the schematics and board datas based on
Creative Commons and the firmware source codes based on GPL.
Because this is also "Free Hardware" same as PICnome and PICratchBOX.
Last 5 posts in Controller
- <!--:ja-->Chalkboard Electronicsのタッチスクリーンの輝度を強制的に最大値にする<!--:--><!--:en-->How to raise the brightness to max value of Chalkboard Electronics Touch Screen<!--:-->
- <!--:ja-->Banana Piでタッチスクリーンを使う<!--:--><!--:en-->How to use a touchscreen on Banana Pi<!--:-->
- <!--:ja-->Banana Piでのカーネル再構築<!--:--><!--:en-->Re-compile of Kernel on Banana Pi<!--:-->
- <!--:ja-->Banana Piで解像度1366x768のモニタを使う場合<!--:--><!--:en-->How to use the screen resolution 1366x768<!--:-->
- <!--:ja-->Banana Pi(Bananian)へのPd-extendedのインストール<!--:--><!--:en-->How to install Pd-extended to Bananian on Banana Pi<!--:-->
コメントをどうぞ